Description

DRO-1000 series Dielectric Resonator Oscillator (DRO) utilizes state-of-the-art MIC to provide a highly stable, reliable and efficient signal source at microwave frequencies up to 50 GHz. The low profile and rugged construction provide excellent durability against harsh environmental conditions.

DRO-1000 oscillator is designed using FET or BJT amplifier with series feedback at source and Dielectric Resonator at the gate. High gain, low noise FETs/BJTs are biased positively or negatively at the gate to ensure minimum phase noise. The device is carefully matched for maximum power, minimum phase-noise and Voltage Standing Wave Ratio (VSWR). The oscillator is matched for maximum temperature stability and optimum negative resistance.

DRO-1000 oscillator is buffered by cascaded low-noise driver and power amplifiers for minimum load pulling, maximum isolation and power. FET/BJT devices are directly attached to gold plated Kovar carriers to minimize shear effect and maximize heat sinking. Kovar carriers are mounted to the chassis to provide an efficient thermal junction and a stable structure for reduction of microphonics. To ensure oscillator stability over the full temperature range, the tuning elements are precisely designed and positioned to compensate for temperature drift by a factor of three.

DRO-1000 series provide several advantages over other microwave signal sources, such as Gunn Cavity Oscillators and Crystal Multiplier Chains.

DRO-1000 series is internally voltage regulated to avoid reverse bias, frequency pushing, bias modulation and voltage transients. Mechanical frequency adjustment is provided for optimum phase voltage setting.

Features

  • Dielectric Resonator
  • Internal Voltage Regulator
  • 150 MHz Bandwidth
  • Low Phase Noise
  • MIC Fabrication
  • Low microphonics
  • Low power consumption
  • Up to +25 dBm output power
  • Available from 1 – 50 GHz
  • Operating range : -55ºC to +105ºC

Applications

  • Satellite communications
  • Cable TV links (CATV)
  • Local Area Networks (LAN)
  • Global Positioning Systems (GPS)
  • Test Equipment
  • Point to Point
  • Up/Down Converters
  • Transmitter & Receivers
  • Digital radios
  • Missile guidance
  • Space, Military, and Commercial

Specifications

Model Number DRO-1000-XX.XX (Where XX.XX is freg in GHz)
Single Frequency 1.00 to 50.00 GHz
Mechanical Tuning Range 100 MHz
Electrical Tuning Optional
Power Output +13 dBm, up to +25 dBm Optional
Load VSWR, Maximum 2.0 : 1.0
Power Requirements +15, +12, +10 VDC, 90 mA
Pushing / Pulling 10 ppm/V Max  /  +/-90 ppm Max
Frequency Stability 4 ppm/ ºC
Phase Noise See Phase Noise Envelope (Fig. A)
Spurious -85 dBc
Harmonics -25 dBc
Operating Temperature 0ºC to 50ºC Standard; -55 ºC to 105 ºC Optional
Storage Temperature -55 ºC to 125 ºC
Connectors SMA-Female or 2.92 mm-Female
Size 2.25″ x .93″ .67″
Finish Nickel

Datasheet

DRO-1000.pdf

Diagrams

Phase Noise Envelope

dro-1000-2

 

Block Diagram

dro-1000-3

 

Outline Diagram

dro-1000